Home > Engine > Cylinder Head > Camshafts > 12V VR6 >

Cat Cams 7607224 for 12V VR6
Cat Cams 7607224 for 12V VR6
 
Our Price: $561.99


Product Code: CAT7607224
Qty:

Description
 

7607224
tarmac rally - race
Volkswagen AAA
VR-6cyl 2.8L 12v DOHC (DTH/DTH)
Save to PDF
intake
exhaust
camshaft data:
lash ramp
: hydro
hydro
duration @ 0.1mm
: 298 degrees
298 degrees
duration @ 1.0mm
: 258 degrees
258 degrees
valve lift
: 12.50mm
12.50mm
cam lift
:
lobe angle
: 108 degrees
108 degrees
timing @ 1.0mm
: 21 degrees / 57 degrees
57 degrees / 21 degrees
valve lift @ TDC
: 3.75mm
3.75mm
parts setup:
cam wheels :
:
:
follower
: O.E.M.
: O.E.M.
valve lash
: O.E.M.
: O.E.M.
valve
: O.E.M.
: O.E.M.
valve locks
: O.E.M.
: O.E.M.
upper retainer
: O.E.M.
: O.E.M.
lower retainer
: O.E.M.
: O.E.M.
exterior spring
: View PAC-E99860
: View PAC-E99860
interior spring
: View PAC-I99860
: View PAC-I99860
fitted load / length
: 31kg @ 33.0mm
: 31kg @ 33.0mm
max. load / lift
: 99kg @ 13.0mm
: 99kg @ 13.0mm
REMARKS :
#
check interference between valve seal and retainer over 10,5mm lift
REMARKS :
#
FOR COMPETITION APPLICATIONS ONLY. Following details must be verified:
-
the camshafs must turn smooth in the cylinderhead, provide free travel by machining where needed
-
distance between valve seal and retainer at full lift must be 0.6mm at least
-
minimum valve spring travel of 1.0mm at full lift must be provided
-
distance between valve and piston 1.0mm (pref. 1.5mm). check 5-15 degrees before TDC on exhaust, and after TDC on intake
#
stand alone ECU based on throttle position sensor required

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Engine > Cylinder Head > Camshafts > 12V VR6
Engine > Cylinder Head > Camshafts